📏 Wall-to-Post Measurements – 4 m (13 ft) Wall Side
Measurement Type | Description | mm | in | ft |
Wall to Inner Post | Wall surface → inner edge | 3705 | 145.87 in | 12.16 ft |
Wall to Outer Post | Wall surface → outer edge | 3825 | 150.59 in | 12.55 ft |
💡 Tip: Measure from the finished wall surface to account for bracket depth.
⚙️ Baseplate-to-Baseplate Measurements – 4 m (13 ft) Wall Side
Measurement Type | Description | mm | in | ft |
Wall to Inner Baseplate | Wall → inner edge | 3675 | 144.69 in | 12.06 ft |
Wall to Outer Baseplate | Wall → outer edge | 3855 | 151.77 in | 12.65 ft |
💡 Tip: Mark 3855 mm (12.65 ft) for outermost anchor holes.
📏 Post-to-Post Measurements – 6 m (19 ft) Front Side
Measurement Type | Description | mm | in | ft |
Outer to Outer Post | Total front length | 5688 | 223.98 in | 18.66 ft |
Outer to Inner Post | Outer edge → center post edge | 2784 | 109.61 in | 9.14 ft |
Inner to Inner Post | Center to center open space | 2664 | 104.88 in | 8.74 ft |
💡 Tip: Center posts divide the 19 ft span into two equal bays ≈ 9.5 ft each.
⚙️ Baseplate-to-Baseplate Measurements – 6 m (19 ft) Front Side
Measurement Type | Description | mm | in | ft |
Inner to Inner Baseplate | Between inner edges | 2604 | 102.56 in | 8.55 ft |
Outer to Inner Baseplate | Outer → center edge | 2784 | 109.61 in | 9.14 ft |
Outer to Outer Baseplate | Total baseplate span | 2964 | 116.69 in | 9.72 ft |
💡 Tip: Spacing repeats for front and rear bays.
📐 Post Height Measurements
Measurement Type | Description | mm | in | ft |
Post Edge (ground) → Beam | Ground → bottom of beam | 2330 | 91.73 in | 7.64 ft |
Outer to Outer Post Height | Ground → top of beam | 2503 | 98.54 in | 8.21 ft |
Post Edge (ground) → Open Louvers Top | Ground → top louvers (open) | 2560 | 100.79 in | 8.40 ft |
💡 Tip: Maintain ≥ 100 mm (4 in) clearance above louvers for safe motor movement.
🧩 Installation Planning Tips
Level wall beam with laser before anchoring.
Mark 5688 mm × 3945 mm outer corners.
Footers: 400 × 400 mm (16 × 16 in) × 400 mm deep.
Keep 30 mm (1.2 in) tolerance for adjustment.
Seal wall connection with weatherproof sealant.
Check motor side clearance (50 mm / 2 in).
Confirm drainage flow away from wall and center posts.