Skip to main content

Pro+ 13×13 Motorized Wall-Mounted Pergola (Post-to-Post Measurement)

This article lists the official wall-to-post, baseplate, and height measurements for the Pro+ 13×13 (4×4 m) Motorized Wall-Mounted Pergola.

Updated over 2 weeks ago

📏 Wall-to-Post Measurements – 4 m (13 ft) Wall Side

Measurement Type

Description

mm

in

ft

Wall to Inner Post

From wall surface → inner edge of post

3705

145.87 in

12.16 ft

Wall to Outer Post

From wall surface → outer edge of post

3825

150.59 in

12.55 ft

💡 Tip: Always measure from the finished wall surface, not siding or trim.


⚙️ Baseplate-to-Baseplate Measurements – 4 m (13 ft) Wall Side

Measurement Type

Description

mm

in

ft

Wall to Inner Baseplate

Wall → inner baseplate edge

3675

144.69 in

12.06 ft

Wall to Outer Baseplate

Wall → outer baseplate edge

3855

151.77 in

12.65 ft

💡 Tip: Mark 3855 mm (12.65 ft) for outer anchor positions.


📏 Front Post-to-Post Measurements – 4 m (13 ft) Front Side

Measurement Type

Description

mm

in

ft

Outer to Outer Post

Full span between front post edges

3945

155.31 in

12.94 ft

Outer to Inner Post

Outer → inner edge of opposite post

3825

150.59 in

12.55 ft

Inner to Inner Post

Clear opening between post faces

3705

145.87 in

12.16 ft

💡 Tip: Keep 3945 mm (12.94 ft) between front outer edges for perfect alignment.


⚙️ Front Baseplate-to-Baseplate Measurements – 4 m (13 ft)

Measurement Type

Description

mm

in

ft

Inner to Inner Baseplate

Between inner edges

3645

143.50 in

11.96 ft

Outer to Inner Baseplate

Outer → inner edge

3825

150.59 in

12.55 ft

Outer to Outer Baseplate

Full span across edges

4005

157.68 in

13.14 ft

💡 Tip: Use 4005 mm (13.14 ft) when drilling footer anchors.


📐 Post Height Measurements

Measurement Type

Description

mm

in

ft

Post Edge (ground) → Beam

Ground → bottom of beam

2330

91.73 in

7.64 ft

Outer to Outer Post Height

Ground → top of beam

2503

98.54 in

8.21 ft

Post Edge (ground) → Open Louvers Top

Ground → top louvers (open)

2560

100.79 in

8.40 ft

💡 Tip: Provide ≥ 100 mm (≈ 4 in) overhead clearance for louvers.


🧩 Installation Planning Tips

  1. Align wall beam with laser level before drilling.

  2. Use 3945 mm × 3825 mm for corner layout.

  3. Footers: 400 × 400 mm (16 × 16 in) × 400 mm deep.

  4. Allow 30 mm tolerance for adjustments.

  5. Seal wall beam with weatherproof sealant.

  6. Leave 50 mm (2 in) motor clearance side.

  7. Check drainage flow away from wall.

Did this answer your question?