Pro+ 13×19 Manual Wall-Mounted Pergola (Post-to-Post Measurement)

👉 Orientation Notes

4 m (13 ft) = pergola width (attached to wall).
6 m (19 ft) = total projection (length), divided into two equal bays (≈ 9.5 ft each) with a shared center post.

All dimensions are shown in millimeters (mm), inches (in), and feet (ft).

📏 Wall-to-Post Measurements – 4 m (13 ft) Wall Side

Measurement Type	Description	mm	in	ft
Wall to Inner Post	From wall surface to inner face of front post (usable depth).	3705 mm	145.87 in	12.16 ft
Wall to Outer Post	From wall surface to outer edge of front post (total projection).	3825 mm	150.59 in	12.55 ft

💡 Tip: Use 3825 mm (12.55 ft) when marking the distance from wall beam to front post footings.

Measurement Type	Description	mm	in	ft
Wall to Inner Baseplate	From wall to inner edge of baseplate.	3675 mm	144.68 in	12.06 ft
Wall to Outer Baseplate	From wall to outer edge of baseplate (max mount depth).	3855 mm	151.77 in	12.65 ft

💡 Tip: Leave ≈ 20 mm (¾ in) tolerance between wall beam and posts for alignment and sealant clearance.

Measurement Type	Description	mm	in	ft
Outer to Outer Post	Depth between outer edges of each bay’s front posts.	2904 mm	114.33 in	9.53 ft
Outer to Inner Post	Outer edge → inner edge within one bay.	2784 mm	109.61 in	9.13 ft
Inner to Inner Post	Clear open depth between inner faces (one bay).	2664 mm	104.88 in	8.74 ft

💡 Tip: Each bay shares a center post with the next section; measure each bay individually to ensure symmetry before anchoring.

Measurement Type	Description	mm	in	ft
Inner to Inner Baseplate	Between inner edges of each bay’s baseplates.	2604 mm	102.52 in	8.54 ft
Outer to Inner Baseplate	Outer → inner edge (one bay).	2784 mm	109.61 in	9.13 ft
Outer to Outer Baseplate	Outermost span (one bay).	2964 mm	116.69 in	9.72 ft

💡 Tip: Anchor holes should follow the outer-to-outer baseplate measurement (2964 mm / 9.72 ft) for each bay to maintain uniform spacing.

Measurement Type	Description	mm	in	ft
Outer End to Outer End Post	Full width across both bays (outer posts).	5688 mm	223.86 in	18.66 ft
Inner End to Inner End Post	Center-to-center between shared posts.	5448 mm	214.49 in	17.87 ft

💡 Tip: Verify 5688 mm (18.66 ft) as the total length when marking footer positions to ensure both bays align properly.

Measurement Type	Description	mm	in	ft
Post Edge (ground) → Beam	Height to underside of beam.	2330 mm	91.73 in	7.64 ft
Outer to Outer Post Height	Full height from base to beam top.	2503 mm	98.54 in	8.21 ft
Post Edge (ground) → Open Louvers Top	Height to top of louvers when fully open.	2560 mm	100.79 in	8.40 ft

💡 Tip: Provide ≥ 100 mm (≈ 4 in) of clearance above the structure to allow smooth louver operation and prevent contact with eaves or gutters.

Ensure the mounting wall is solid concrete or reinforced masonry to support beam load.
Use outer-to-outer measurements to mark corners before pouring footers.
Recommended footer size: 400 × 400 mm (16 × 16 in), depth 400 mm (16 in).
Check level and square for each bay before connecting center posts.
Leave ~30 mm (1.2 in) clearance for alignment and expansion.
Tighten center-post bolts last after verifying beam connection and roof alignment.