Skip to main content

How do I clean and maintain the MASTER+ Pergola?

The MASTER+ Pergola requires minimal maintenance — simply clean with mild soap and water, keep the drainage system clear, and inspect moving parts annually to ensure long-lasting performance.

Updated over 2 weeks ago

Overview

The Hansø MASTER+ Pergola is built for durability, but like any outdoor structure, it performs best with occasional care.
Routine cleaning prevents buildup of dust, leaves, and debris that can affect drainage and motor performance.
All components — including aluminum frames, louvers, and seals — are designed for easy maintenance without the need for special tools or chemicals.


General Cleaning Routine

Component

Cleaning Method

Frequency

Frame & Posts

Wipe with soft sponge and mild soap solution. Rinse with water.

Every 2–3 months

Louvers

Hose lightly or wipe with damp cloth. Avoid abrasive scrubbing.

Every 3 months

Drainage System

Flush gutters and post outlets with water to remove debris.

Every 3–4 months

Rubber Seals

Clean gently with soapy water; inspect for cracks or wear.

Twice a year

Transformer & Cable Area

Check for dust and moisture; keep connections dry.

Every 6 months

💡 A simple rinse every few months keeps your pergola looking new and ensures the drainage system functions efficiently.


Recommended Cleaning Products

Safe to Use:

  • Mild dish soap or gentle detergent (pH neutral)

  • Soft sponge, microfiber cloth, or soft-bristle brush

  • Garden hose (low-pressure setting)

  • Warm water

🚫 Avoid:

  • Pressure washers

  • Acidic or solvent-based cleaners (bleach, acetone, ammonia)

  • Scouring pads or steel wool

  • Strong degreasers or detergents

📌 Harsh cleaners can damage the powder-coated finish or seals.


Louver & Motor Maintenance

  • Keep louvers clean and free from debris for smooth rotation.

  • Do not force louvers open or closed manually — always use the remote or app.

  • If movement becomes noisy or uneven, clean the pivot points and apply a small amount of silicone spray lubricant (never oil-based).

  • Avoid spraying lubricants near the motor or electrical connectors.

💡 The motor is maintenance-free and sealed against dust and moisture.


Drainage System Care

The MASTER+ features a fully integrated gutter and post drainage system.
To keep it functioning perfectly:

  • Remove leaves or twigs from gutters quarterly.

  • Ensure post outlets at ground level remain open and unobstructed.

  • Check corner joints for seal integrity — reapply silicone if needed.

  • Rinse internal drains during seasonal cleaning.

🪣 Proper drainage maintenance prevents overflow and ensures waterproof performance during heavy rainfall.


Touch-Up & Finish Care

  • For minor scratches or blemishes, use RAL-matched touch-up paint:

    • Pure White (RAL 9010)

    • Dark Grey (RAL 7016)

  • Clean the area, dry thoroughly, and apply touch-up with a fine brush.

  • Avoid painting over rubber seals or joints.


Seasonal Care Tips

🌦️ Spring / Summer

  • Clean dust, pollen, and buildup from louvers and frame.

  • Inspect fasteners for tightness.

  • Test remote and motor operation.

❄️ Fall / Winter

  • Clear drains of leaves before rainy or snowy seasons.

  • Keep louvers slightly open during heavy snow to prevent buildup.

  • After melting, open louvers fully to dry the interior frame.


Long-Term Preservation

  • Keep motor and transformer areas protected from moisture.

  • Close louvers during high winds or long periods of non-use.

  • Avoid hanging heavy objects or decorations from beams.

  • For homes near saltwater or coastal air, rinse aluminum surfaces monthly to prevent salt buildup.

📌 With regular care, the MASTER+ Pergola maintains its strength and finish for over a decade.

Did this answer your question?