Skip to main content

Apex Post-to-Post Measurements

View Apex post-to-post measurement guides by size, including reference dimensions, post layout, base plate information, foot plate cover details, and when to use Hanso’s Professional Install Service for measurement confirmation.

The Apex Pergola has specific post-to-post measurements for each size. These measurements help customers, contractors, and installers understand where the posts are positioned and how much space is needed for installation.

Apex was formerly known as Master+. Some older manuals, labels, or measurement diagrams may still reference Master+, but they apply to the Apex Pergola unless otherwise noted.


Official Apex post-to-post measurement PDFs

Use the PDF for your exact Apex size when checking post placement and layout.


Reference dimensions by size

The table below shows the manufacturer’s reference dimensions for each Apex size.

Apex Size

Reference Dimensions

Approx. Feet

Total Boxes

10' x 10'

3000 × 3000 × 2700 mm

9.84 × 9.84 × 8.86 ft

7

10' x 13'

3000 × 4000 × 2700 mm

9.84 × 13.12 × 8.86 ft

8

10' x 19'

3000 × 6000 × 2700 mm

9.84 × 19.69 × 8.86 ft

10

10' x 26'

3000 × 8000 × 2700 mm

9.84 × 26.25 × 8.86 ft

14

13' x 13'

4000 × 4000 × 2700 mm

13.12 × 13.12 × 8.86 ft

8

13' x 19'

4000 × 6000 × 2700 mm

13.12 × 19.69 × 8.86 ft

10

13' x 23'

4000 × 7000 × 2700 mm

13.12 × 22.97 × 8.86 ft

13

13' x 26'

4000 × 8000 × 2700 mm

13.12 × 26.25 × 8.86 ft

14

The size name, such as 10' x 13', is a product size category. Always check the PDF for the exact post-to-post layout for your selected size.


What does post-to-post measurement mean?

Post-to-post measurement refers to the distance between pergola posts.

This is important because the post locations determine:

  • Where the pergola will sit

  • Where the base plates will be anchored

  • Whether the pergola will fit your patio, deck, or concrete area

  • Whether posts may interfere with furniture, doors, stairs, railings, drains, or other obstructions

Do not measure only the roof coverage area. You also need to confirm where the posts and base plates will land.


Single-bay and double-bay post layout

Apex comes in both single-bay and double-bay sizes.

Bay Type

Apex Sizes

Typical Freestanding Post Count

Single bay

10x10, 10x13, 13x13, 10x19, 13x19

4 posts

Double bay

10x26, 13x23, 13x26

6 posts

Double-bay sizes are larger and use additional center support posts. Always review the PDF for your exact size before confirming the installation area.


Base plate and foot plate information

Each Apex post is secured using a base plate.

The post-to-post measurement PDFs include important details such as:

  • Post locations

  • Base plate location

  • Foot plate information

  • Foot plate cover diagrams

  • Measurement references for the selected size

Do not remove or ignore the base plate and foot plate information from the measurement guide. These details help installers understand how the pergola will be anchored and finished.


Why base plate placement matters

Base plate placement is important because each post must be anchored to a suitable surface.

Before installation, confirm:

  • The base plates will not sit too close to an edge

  • The surface is level and stable

  • The area can be drilled and anchored

  • The base plates will not interfere with drains, cracks, paver edges, deck seams, or steps

  • The post locations will not block doors, walkways, furniture, or stairs

Apex cannot simply sit unsecured on the ground. Proper anchoring is required for safety and performance.


Special note for wall-mounted Apex Pergolas

For wall-mounted Apex Pergolas, the post-to-post measurement still matters, but the wall connection also needs to be reviewed.

Before choosing wall-mounted, confirm:

  • The wall is structurally suitable

  • There is enough height for attachment

  • The attachment area is clear of gutters, vents, windows, pipes, trim, or lights

  • The front post locations have enough space for anchoring

  • The louvers have enough clearance to open and close

A qualified contractor should review the wall if there are any concerns.


Need help confirming post placement?

Hanso’s Professional Install Service may be available to help review your installation needs and complete the pergola assembly.

This service is especially helpful if you are unsure about:

  • Post placement

  • Base plate locations

  • Wall-mounted feasibility

  • Deck or paver installation

  • Anchoring requirements

  • Double-bay sizing

  • Tight clearance

  • Uneven or complex installation surfaces

Professional installation availability may vary by location and project scope. Contact Hanso Support to check availability.


What to send Hanso Support

If you need help checking post-to-post measurements, send:

  • Your preferred Apex size

  • Freestanding or wall-mounted preference

  • Photos of the installation area

  • Width, depth, and height measurements

  • Surface type

  • Photos of the wall, if wall-mounted

  • Any nearby obstructions

  • Your city and state, if asking about Professional Install Service

Did this answer your question?