🔧 Overview
Hansø Pro+ Pergolas are designed to support Retractable Sunshades, Aluminum Slat Walls, or a combination of both.
Compatibility depends on your pergola type (Manual or Motorized) and whether it’s Freestanding or Wall-Mounted.
🟩 Manual Freestanding Pergolas
Pergola Size | Compatible Sides for Sunshades/Slats | Notes |
10x10 | 3 sides | One beam has the hand crank — sunshade/slat not possible on that side. |
10x13 | 3 sides | Hand crank is on the 13’ side — that beam cannot hold a shade/slat. |
13x13 | 4 sides | Hand crank located on the middle beam, allowing installation on all four sides. |
13x19 | 4 sides | Hand crank located on the middle beam, allowing installation on all four sides. |
🟩 Manual Wall-Mounted Pergolas
Pergola Size | Compatible Sides for Sunshades/Slats | Notes |
10x10 | 2 sides (left & right) | Front beam has the hand crank, wall side not compatible. |
10x13 | 2 sides (left & right) | Front 13’ beam has the hand crank. |
13x13 | 3 sides (front, left, right) | Wall side not compatible. |
13x19 | 3 sides (front, left, right) | Wall side not compatible. |
⚠️ Note:
If you want to install a sunshade or slat wall on the wall side, a professional installer must first attach a 90° structural mounting board for safe and secure installation.
🟩 Motorized Freestanding Pergolas
Pergola Size | Compatible Sides for Sunshades/Slats | Notes |
10x10 | All 4 sides | Compatible with sunshade, slat wall, or combination. |
10x13 | All 4 sides | Fully compatible. |
13x13 | All 4 sides | Fully compatible. |
13x19 | All 4 sides | Fully compatible. |
🟩 Motorized Wall-Mounted Pergolas
Pergola Size | Compatible Sides for Sunshades/Slats | Notes |
10x10 | 3 sides | All sides except the one attached to the wall. |
10x13 | 3 sides | All sides except the wall side. |
13x13 | 3 sides | All sides except the wall side. |
13x19 | 3 sides | All sides except the wall side. |
⚠️ Note:
If you wish to mount a sunshade or slat wall on the wall side, a professional installer must attach a 90° structure board to support the hardware safely.
🧩 Installation Tip
For best performance and alignment:
Ensure brackets are installed level and equally spaced.
Avoid installing shades or slats on beams with hand-crank mechanisms (Manual Pergolas).
Always test louver operation after installing any shade or slat wall to ensure clearance.