Skip to main content

Pro+ Pergola — How to Attach Retractable Sunshades

Follow this step-by-step guide to install and attach the retractable sunshades on your Hansø Pro+ Pergola, including mounting instructions and alignment tips.

Updated this week

🌤️ Overview

Hansø Pro+ Pergolas are compatible with optional retractable side sunshades, designed to provide additional shade and privacy.
This article explains how to attach and align your sunshades safely and correctly.

For a complete walkthrough, download the PDF installation guide below.


Tools You’ll Need

  • Power drill with screwdriver bits

  • Allen keys (included with hardware)

  • Level and measuring tape

  • Ladder or step stool

  • Provided mounting hardware and brackets


⚙️ Installation Steps

1. Identify Mounting Points

  • Locate the pre-drilled holes or mounting tracks on your pergola beam posts.

  • Each retractable sunshade mounts between two vertical posts — confirm the correct orientation before installation.


2. Attach the Mounting Brackets

  • Align the bracket holes with the pre-drilled post holes.

  • Use the provided bolts and washers to secure the brackets firmly.

  • Ensure brackets are perfectly level — uneven brackets can cause the shade to jam or roll unevenly.


3. Install the Shade Cassette

  • Lift the shade cassette housing (the roller unit) onto the top brackets.

  • Insert the bolts through the bracket slots and tighten evenly.

  • Double-check that the shade rolls smoothly and evenly across the full width.


4. Secure the Bottom Track or Guide Wires

Depending on your shade type:

  • Track-guided models:

    • Align the bottom rail with the side posts and secure using the included screws.

  • Wire-guided models:

    • Attach the tension wires from top to bottom and tighten them evenly to prevent sagging.


5. Test the Shade Operation

  • Pull the shade down fully and retract it several times to ensure smooth movement.

  • Make sure the locking clips (if included) engage properly at the bottom.

  • If the shade feels stiff or uneven, loosen one side slightly and realign the housing.


⚠️ Safety & Maintenance Tips

  • Always install on a stable structure — do not force bolts or overtighten.

  • Avoid operating the sunshade during strong winds.

  • Periodically check that all bolts and brackets remain tight.

  • Clean the fabric with mild soap and water only; avoid harsh chemicals.


📎 Resources

Did this answer your question?