🔩 I. Mounting on the Beam
Tools required:
Percussion drill
M6×14 screws (x2)
Butterfly nuts (x2)
2 self-tapping screws
L-shaped mounting bracket (included)
Steps:
Position the bracket
Follow the direction shown in the diagram.
Place the L-shaped bracket on the beam (⚠️ Do not drill on the gutter!).
Drill holes
Use a percussion drill to create pilot holes for the bracket.
Fix the bracket
Secure it with 2 self-tapping screws.
Attach the heater
Fix the heater body to the bracket using two M6×14 screws and butterfly nuts.
🧱 II. Mounting on the Wall
If beam mounting isn’t possible, the heater can also be mounted directly on a wall.
Steps:
Choose a suitable location that maintains safe clearance from nearby materials.
Use the provided L-shaped bracket and secure it to the wall with appropriate anchors.
Mount the heater unit and tighten with M6×14 screws and butterfly nuts.
Connect to a 120V AC power source.
⚡ Safety Notes
Never drill into or through gutters.
Ensure the heater is mounted securely and level.
Keep at least 6 ft (1.8 m) clearance from any combustible surface.
Confirm power supply is AC120V.
Only operate when the heater is fully secured in place.
🧾 Specifications
Item | Details |
Model | HB-1500R |
Voltage | AC120V |
Mounting | Wall or beam |
Hardware | 2× M6×14 screws, 2× butterfly nuts, 2× self-tapping screws, 1× L-bracket |
Suitable Locations | Outdoor pergola beams, patio walls, gazebos |